Heavy Duty Air Slide Hammer
モデル :
AET-00919 / AET-00919K
AET-00919 w/o Front Hub Puller NEW 1124
AET-00919K w Front Hub Puller
Heavy Duty Air Slide Hammer
● With matching threads on the extension rod and spindle,
this tool can be used as either a long reach or a short slide hammer,
ideal for tight spots where traditional tools can't access.
● The 1st true air slide hammer puller on the market, offering up
to 1400 hammer blows per minute with the ease of a trigger pull.
● Comparable to a 3.5-4.5 lb manual slide hammer for tough joints
(rusted, solid, or seized parts) and a 4.5-6 lb hammer
for easier joints (dent pulling, rear axle bearings, etc.).
● Featuring common 5/8”-18 threads, designed for use with
most slide hammer attachments to handle tasks ranging
from pilot bearings to hubs and collision repairs.
AET-00919K w Front Hub Puller
Heavy Duty Air Slide Hammer
● With matching threads on the extension rod and spindle,
this tool can be used as either a long reach or a short slide hammer,
ideal for tight spots where traditional tools can't access.
● The 1st true air slide hammer puller on the market, offering up
to 1400 hammer blows per minute with the ease of a trigger pull.
● Comparable to a 3.5-4.5 lb manual slide hammer for tough joints
(rusted, solid, or seized parts) and a 4.5-6 lb hammer
for easier joints (dent pulling, rear axle bearings, etc.).
● Featuring common 5/8”-18 threads, designed for use with
most slide hammer attachments to handle tasks ranging
from pilot bearings to hubs and collision repairs.
AET-00919 w/o Front Hub Puller NEW 1124
AET-00919K w Front Hub Puller
Heavy Duty Air Slide Hammer
● BPM: 1400BPM
● Air Inlet: 1/4" NPT
● Recommended Airpressure: 90PSI (6.3BAR)
● Average Airconsumption: 30 SCFM
● Stroke: 35mm
● Spindle: M18 x 1.5P
● Extension Rod: 5/8" x 18P x 230mmL
● Option Accessories: Front Hub Puller
AET-00919K w Front Hub Puller
Heavy Duty Air Slide Hammer
● BPM: 1400BPM
● Air Inlet: 1/4" NPT
● Recommended Airpressure: 90PSI (6.3BAR)
● Average Airconsumption: 30 SCFM
● Stroke: 35mm
● Spindle: M18 x 1.5P
● Extension Rod: 5/8" x 18P x 230mmL
● Option Accessories: Front Hub Puller
